Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
Tests so far have proven there is a fault with the primary heat exchanger which is the cause of the poor DHW, however while proving this the return filter was found to be restricted or blocked. This is likely to indicate a wider issue with the system that will need further investigation and rectifying to stop the fault re occurring.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
