Set Appliance State:
Isolate Mains Power to appliance as per TOPs P4
Prepare the boiler for a combustion test as per the manufacturers instructions (refer to adapt for guidance)
Prepare the boiler for a combustion test as per the manufacturers instructions (refer to adapt for guidance)
| WARNING! Mains voltage is expected during test, follow TOPs P4 live testing procedure |
Measurement:
Carry out a combustion test as per the manufacturers instructions.
Please refer to adapt for guidance.
Note:
A calibrated combustion analyser must be used for this test.
Please refer to adapt for guidance.
Note:
A calibrated combustion analyser must be used for this test.
