Set Appliance State:
Mains Power Off
Turn Hot Water Tap On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance if required (rotate selector switch to OFF position for 4 seconds, then rotate back to DHW/CH position).
Allow appliance to commence its ignition sequence.
Does the burner cross light with a stable flame picture?
Note.
Burner will only light for approximately 10 seconds then lockout will occur
after 1 to 3 attempts, reset appliance as required until test is complete.
Allow appliance to commence its ignition sequence.
Does the burner cross light with a stable flame picture?
Note.
Burner will only light for approximately 10 seconds then lockout will occur
after 1 to 3 attempts, reset appliance as required until test is complete.
