Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
CH Demand
Remove locking pin and release diverter motor
Note.
The diverter motor can be removed without the need for draining
Note.
The diverter motor can be removed without the need for draining
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Inspect the position of the diverter motor spindle.
Is it in the fully retracted position?
Note.
If Diverter spindle is fully retracted do NOT refit the motor.
Is it in the fully retracted position?
Note.
If Diverter spindle is fully retracted do NOT refit the motor.
Isolate as per TOPs P4
and refit as necessary