Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to AC Volts 
Remove connector CN900 (detection electrode lead) from the PCB
Ensure NO demands are present
Ensure NO demands are present
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Measurement:
Reset appliance if required (press reset button for 2 seconds and release).
Measure for A/C voltage across CN900 terminal and a suitable earth connection.
Expected voltage measured approximately 119 Vac.
Measure for A/C voltage across CN900 terminal and a suitable earth connection.
Expected voltage measured approximately 119 Vac.
Isolate as per TOPs P4
and refit as necessary