Set Appliance State:
Mains Power Off
Turn Hot Water Tap On
Selector switch set to CH/DHW position
Boiler DHW thermostat set to MAX
Boiler DHW thermostat set to MAX
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow the burner to ignite and run on DHW.
With a flow rate at the tap of approximately 10.2 litres/min is there a temperature rise of approximately 35° C and is the performance satisfactory?
Note:
Flow rates less than that stated above will produce a greater temperature rise.
With a flow rate at the tap of approximately 10.2 litres/min is there a temperature rise of approximately 35° C and is the performance satisfactory?
Note:
Flow rates less than that stated above will produce a greater temperature rise.
