INSPECTION CH TEMPERATURE CONTROL SPINDLE

Set Appliance State:

Isolate Mains Power to appliance as per TOPs P4

Gain access to PCB

Observation:

Check for correct spindle alignment into the potentiometer
and that the spindle has not snapped.
To check that the potentiometer and spindle are aligned
correctly follow the procedure below:

vk.sabre 35he.pot.p3.spindle removed.gif

1. Remove the spindle and rotate the potentiometer fully clockwise, this is the MIN position.

2. Insert the spindle and turn the knob fully anti-clockwise

3. The potentiometer will now be in the MAX position.