Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove fan and the fan venturi (located in fan outlet)
Measurement:
Check fan impeller moves freely and fan blades are clean.
Inspect the venturi for restrictions or damage.
Note:
It is not sufficient to just blow through the venturi,
ensure it is removed and cleaned thoroughly with
an abrasive cloth and/or washed in water.
Inspect the venturi for restrictions or damage.
Note:
It is not sufficient to just blow through the venturi,
ensure it is removed and cleaned thoroughly with
an abrasive cloth and/or washed in water.
