Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the burner door assembly c/w fan and gas valve assembly
Observation:
Visually inspect the burner for restrictions and any signs of damage.
Measure the spark gap between the tip of the electrode and the burner.
The gap should measure approximately 9mm.
Note.
Always examine any seals or gaskets, replacing where necessary.
Measure the spark gap between the tip of the electrode and the burner.
The gap should measure approximately 9mm.
Note.
Always examine any seals or gaskets, replacing where necessary.
