POWER UP SELF CHECK

Set Appliance State:

Ensure NO demands

WARNING! - Mains voltage is expected during test follow
TOPs P4 live testing procedure

Mains Power On

Observation:

Reset appliance, press and hold the reset button until the chimney
sweep button led flashes rapidly, then release the reset button.
The appliance will carry out a self-check, during this time the pump
will purge (PULSE) for approximately 4 minutes.
If the self-check has completed successfully, the reset button will be
the only LED illuminated (green) after the pump purge has completed.

bx-maineco-combi-35.status-2-flashes-anni.gif

e.g. Error / Status codes - Sweep and / or reset LED flashing

SELF CHECK COMPLETE

(reset led illuminated)

Note.
The 4 minute pump purge cannot be cancelled and will commence every time power is reinstated. Where possible the model will carry out tests during this purge period or will leave the power to the appliance switched on if safe to do so.