Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the diverter valve actuator from the diverter valve body
Observation:
Check for free movement of the diverter valve spindle.
It should be possible to depress the diverter valve spindle with a fairly small amount of pressure.
The HW position is when the pin is fully raised.
When pushed in the pin should return to the raised position when released.
Note:
For clarity the graphic shows the valve removed but it is possible to check the spindle with the valve in situ and the actuator removed
It should be possible to depress the diverter valve spindle with a fairly small amount of pressure.
The HW position is when the pin is fully raised.
When pushed in the pin should return to the raised position when released.
Note:
For clarity the graphic shows the valve removed but it is possible to check the spindle with the valve in situ and the actuator removed
Isolate as per TOPs P4
and refit as necessary