Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
The injector pipe is located at the bottom of the boiler above the fan.
Remove injector pipe and inspect the pipe and its seals.
Check if there are any blockages or damage.
Notes:
1. When the pipe is replaced it should be checked for soundness.
2. The injector pipe may differ in appearance but the checks required remain the same.
Remove injector pipe and inspect the pipe and its seals.
Check if there are any blockages or damage.
Notes:
1. When the pipe is replaced it should be checked for soundness.
2. The injector pipe may differ in appearance but the checks required remain the same.
Isolate as per TOPs P4
and refit as necessary