Set Appliance State:
Mains Power Off
Turn Hot Water Tap On
Turn DHW thermostat to MAX
Use performance tester temperature probe to measure HW from taps
Use performance tester temperature probe to measure HW from taps
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow tap to run with an approx flow rate of 8 l/min.
Keep running tap for a minimum of 10 minutes to see if temperature from tap exceeds 65°C, runs hot then cool or cuts out on overheat.
Keep running tap for a minimum of 10 minutes to see if temperature from tap exceeds 65°C, runs hot then cool or cuts out on overheat.
