FACTORY RESET - MAIN PCB
None
1. Press the top 2 buttons simultaneously then release, the current status code for the appliance will be shown.
2. Press ►
(top right button) once to access the installer level. Code -- will appear in the display.
(top right button) once to access the installer level. Code -- will appear in the display.
3. Set the value to 17 by using the + or - buttons then Press ✓ (top right button) to confirm.
4. D--- will now be displayed, navigate to D.096 by using the + or - buttons.
Carry out a Factory Reset using the Procedure below;
6. The value will now flash. Change the value to 1 using the + or - buttons. Press ✓ (top right button) once to confirm the setting, finally Press top left button twice (return arrow) to store the setting and return the display back to standby mode, all adjustable parameters will now be reset to factory setting.
5. D.096 will now flash, press ✓ (top right button) once to activate the value setting.
Note:
Refer to Adapt for further guidance if required.
Refer to Adapt for further guidance if required.