Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Gas On
| WARNING! Mains voltage is expected during test, follow TOPs P4 live testing procedure |
Observation:
Run the appliance in chimney sweep mode.
To put the appliance into chimney sweep mode press the + and - buttons together for 5 seconds then release, to exit service mode click cancel.
Can the combustion be adjusted to within the correct parameters?
Note:
1. Refer to manufacturers instructions for how to adjust combustion and expected readings.
2. Carry out performance test in accordance with operational procedures.
To put the appliance into chimney sweep mode press the + and - buttons together for 5 seconds then release, to exit service mode click cancel.
Can the combustion be adjusted to within the correct parameters?
Note:
1. Refer to manufacturers instructions for how to adjust combustion and expected readings.
2. Carry out performance test in accordance with operational procedures.
 gas setup and fan.gif)
