Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Appliance primary circuit drained and discharged
Measurement:
The Schrader valve is located on the centre of
the vessel, right hand side of the appliance.
Ensure the expansion vessel has the correct amount of charge.
Expected charge should be approximately 0.75 bar.
Note:
If expansion vessel charge is ok, do not refill
appliance until a diagnosis is reached.
the vessel, right hand side of the appliance.
Ensure the expansion vessel has the correct amount of charge.
Expected charge should be approximately 0.75 bar.
Note:
If expansion vessel charge is ok, do not refill
appliance until a diagnosis is reached.
