INITIATING CHECK PROGRAMME P.01 - MAXIMUM LOAD
None
1. Press the top 2 buttons simultaneously then release, the current status code for the appliance will be shown.
2. Press ►
(top right button) once to access the installer level, code -- will appear in the display.
(top right button) once to access the installer level, code -- will appear in the display.
3. Set the value to 17 by using the + or - buttons then Press ✓ (top right button) to confirm.
Press ✓ to confirm settings
Refer to Adapt for further guidance if required.
Refer to Adapt for further guidance if required.
4. D--- will now be displayed, Press ► (top right button) to navigate until P-- (check programme mode) is in the display.
5. Set the check programme mode to P.01 by using the + or - buttons. Press ✓ (top right button) once to initiate P.01.
Check programme mode
Maximum load check programme P.01, after successful ignition the appliance will operate at maximum heat input.
6. To end check programme and return to standby P.01 press three times.