Set Appliance State:
Gas Off
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the combustion front assembly
Observation:
Thoroughly inspect the burner assembly for damage, restrictions and/or blockages.
Note:
1. Before the combustion chamber door is refitted and the appliance left in operation the burner door gasket MUST be replaced and new nyloc nuts used.
2. The burner does not need to be removed from the combustion front assembly for this test.
3. If the burner inspection is satisfactory do not reassemble proceed to the next inspection.
Note:
1. Before the combustion chamber door is refitted and the appliance left in operation the burner door gasket MUST be replaced and new nyloc nuts used.
2. The burner does not need to be removed from the combustion front assembly for this test.
3. If the burner inspection is satisfactory do not reassemble proceed to the next inspection.
Isolate as per TOPs P4
and refit as necessary