Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to Resistance 
Measurement:
Measure the resistance between the pins on connector X2 as follows:
Pin 19 and pin 20
Pin 19 and pin 10
Pin 20 and pin 10
Expect a resistance of greater than 1Mohm on each test.
Are the resistances measured as expected?
Pin 19 and pin 20
Pin 19 and pin 10
Pin 20 and pin 10
Expect a resistance of greater than 1Mohm on each test.
Are the resistances measured as expected?
