Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
Tests have proven that the gas valve is faulty and that this has damaged the PCB. The a new gas valve must be fitted before the PCB is replaced.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
