Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Case Removal
Fold down user controls cover and remove the two screws, slide the lower section forward to remove.
To remove the upper case undo the two screws at the top and one from the centre of the bottom then slide the casing forward off the boiler.
Fold down user controls cover and remove the two screws, slide the lower section forward to remove.
To remove the upper case undo the two screws at the top and one from the centre of the bottom then slide the casing forward off the boiler.
Isolate as per TOPs P4
and refit as necessary