Set Appliance State:
Mains Power Off
CH Demand
CH temperature control set to OFF Position
Ensure appliance is cool
Ensure appliance is cool
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance, press and hold the reset button until the chimney
sweep button led flashes rapidly, then release the reset button.
The boiler will first run a self-check.
Allow 25 seconds for self check to complete before proceeding.
If self check has completed successfully, the reset button will be the
only LED illuminated (green).
If a FAULT CODE, STATUS CODE OR NO LED'S ILLUMINATE after 25 seconds self check has elapsed, then choose the appropriate option from below.
sweep button led flashes rapidly, then release the reset button.
The boiler will first run a self-check.
Allow 25 seconds for self check to complete before proceeding.
If self check has completed successfully, the reset button will be the
only LED illuminated (green).
If a FAULT CODE, STATUS CODE OR NO LED'S ILLUMINATE after 25 seconds self check has elapsed, then choose the appropriate option from below.
