Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Check the air pressure switch tubes are fitted correctly, undamaged and free of kinks / restrictions / blockages / moisture.
Note:
Refer to pictures to confirm tubes are fitted correctly.
The tube from the fan venturi should connect to the right hand pipe at the rear of the appliance which in turn connects to the positive side of the APS.
The tube from the flue hood assembly should connect to the left hand pipe at the rear of the appliance which in turn connects to the negative side of the APS.
Note:
Refer to pictures to confirm tubes are fitted correctly.
The tube from the fan venturi should connect to the right hand pipe at the rear of the appliance which in turn connects to the positive side of the APS.
The tube from the flue hood assembly should connect to the left hand pipe at the rear of the appliance which in turn connects to the negative side of the APS.
