Set Appliance State:
Mains Power Off
CH Demand
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance as necessary and allow the boiler to complete its self check.
Set the boiler into service mode by holding down the spanner and eco buttons for approx. 5 seconds.
Switch between maximum and minimum rate by using the up and down arrows.
Carry out a combustion test at both maximum and minimum rates as per manufacturer's instructions
(refer to Adapt for more guidance).
Is the appliance within CO and CO² tolerances on both maximum and minimum rate?
To exit service mode press the OK button.
Set the boiler into service mode by holding down the spanner and eco buttons for approx. 5 seconds.
Switch between maximum and minimum rate by using the up and down arrows.
Carry out a combustion test at both maximum and minimum rates as per manufacturer's instructions
(refer to Adapt for more guidance).
Is the appliance within CO and CO² tolerances on both maximum and minimum rate?
To exit service mode press the OK button.
