Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the fan hood assembly
Observation:
Inspect the burner assembly for blockages or damage.
Note:
If burner condition is ok do not reassemble, as it will need to be removed for further tests.
Per manufacturer's instructions, upon reassembly a replacement gasket (J04-350) for the burner is required.
Note:
If burner condition is ok do not reassemble, as it will need to be removed for further tests.
Per manufacturer's instructions, upon reassembly a replacement gasket (J04-350) for the burner is required.
Isolate as per TOPs P4
and refit as necessary