Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Ensure no demands
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance by turning the temperature control knob to "reset", wait 5 seconds, then turn back up above MIN setting.
The appliance will now complete a self check of approx. 30 seconds.
The fan should run at a constant low speed for 30 seconds then stop.
Once the boiler has completed its self check it should go to standby.
No lights should be displayed and the fan should not run.
The appliance will now complete a self check of approx. 30 seconds.
The fan should run at a constant low speed for 30 seconds then stop.
Once the boiler has completed its self check it should go to standby.
No lights should be displayed and the fan should not run.
