Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove air intake from appliance
Observation:
With the aid of a temperature probe,
check the temperature of the appliance as
close to the flow thermistor as possible.
Note:
Image is shown with the spark generator removed
for clarity but may remain in situ for this test.
check the temperature of the appliance as
close to the flow thermistor as possible.
Note:
Image is shown with the spark generator removed
for clarity but may remain in situ for this test.
Isolate as per TOPs P4
and refit as necessary