Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to AC Volts 
CH Demand
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Measurement:
Measure the voltage between the red and black wires at CON3 on the PCB.
Mains voltage should be present.
Note:
This test is only relevant if
pump is wired from the boiler.
CLICK HERE FOR INFORMATION
Mains voltage should be present.
Note:
This test is only relevant if
pump is wired from the boiler.
CLICK HERE FOR INFORMATION
