Isolate Mains Power to appliance as per TOPs P4
Measurement:
Checking the electrode gap necessitates burner removal.
Apply a straight edge across the top of the burner box and measuring the gap between the straight edge and the electrode the correct gap can be ascertained.
The gap should be 11mm +0mm/- 4mm.
Note:
Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
Apply a straight edge across the top of the burner box and measuring the gap between the straight edge and the electrode the correct gap can be ascertained.
The gap should be 11mm +0mm/- 4mm.
Note:
Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
