Set Appliance State:
Mains Power Off
CH Demand
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance, release then immediately hold down the +
button for approx. 5 seconds until "HI" flashes on the display.
Choose between maximum (HI) and minimum rate (LO)
by pressing the + / - buttons then press ↻ to activate.
Carry out a combustion check at both maximum and
minimum rates as per manufacturer's instructions
(refer to Adapt for more guidance).
Is the appliance within CO and CO2 tolerances on both maximum and minimum rate?
To exit service mode press ↻ and + simultaneously.
button for approx. 5 seconds until "HI" flashes on the display.
Choose between maximum (HI) and minimum rate (LO)
by pressing the + / - buttons then press ↻ to activate.
Carry out a combustion check at both maximum and
minimum rates as per manufacturer's instructions
(refer to Adapt for more guidance).
Is the appliance within CO and CO2 tolerances on both maximum and minimum rate?
To exit service mode press ↻ and + simultaneously.
