Set Appliance State:
Access level 2 diagnostics as in the previous test
Gas On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
The DS number can be disrupted if the power to the boiler is isolated or reset too soon after being switched on. To avoid this wait at least 60 seconds between power off and on/and or reset.
The DS number can be changed by pressing + or - when the value is displayed.
Select the number that corresponds with your model
Press and hold MODE for 5 seconds to confirm.
To exit the diagnostic menu, press the MODE and + buttons
at any time.
Can the DS number be altered to the correct value?
DS NUMBER CHANGED TO CORRECT VALUE
DS NUMBER CANNOT BE SET
The DS number can be changed by pressing + or - when the value is displayed.
Select the number that corresponds with your model
Press and hold MODE for 5 seconds to confirm.
To exit the diagnostic menu, press the MODE and + buttons
at any time.
Can the DS number be altered to the correct value?
DS NUMBER CHANGED TO CORRECT VALUE
DS NUMBER CANNOT BE SET
