Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Remove and inspect flame sense electrode.
Thoroughly check for damaged or cracked insulation and that the tip is not damaged or distorted.
Note:
Although the electrode assembly may be operational, due to it being disturbed the entire electrode assembly must be replaced as per Technical Safety Bulletin.
Thoroughly check for damaged or cracked insulation and that the tip is not damaged or distorted.
Note:
Although the electrode assembly may be operational, due to it being disturbed the entire electrode assembly must be replaced as per Technical Safety Bulletin.
Isolate as per TOPs P4
and refit as necessary