Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Thoroughly check electrodes for cracks and damage
to the electrode ceramics, and good general condition.
Check for correct spark gap.
Gap should be 4.5mm +/- 0.5mm.
Note:
Although the electrode assembly may be operational, due to it being disturbed the entire electrode assembly must be replaced as per Technical Safety Bulletin.
to the electrode ceramics, and good general condition.
Check for correct spark gap.
Gap should be 4.5mm +/- 0.5mm.
Note:
Although the electrode assembly may be operational, due to it being disturbed the entire electrode assembly must be replaced as per Technical Safety Bulletin.
