Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Check the Pipework from the top of the boiler.
For a 30KW boiler (and ideally for a thermal store) the flow and return pipework should be 28mm.
For other boiler outputs the system pipework should be at least 22mm and the system unrestricted.
For a 30KW boiler (and ideally for a thermal store) the flow and return pipework should be 28mm.
For other boiler outputs the system pipework should be at least 22mm and the system unrestricted.
