Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
The pump is not integral to the appliance. It should be fitted on the flow pipe from the boiler and have isolating valves on each side.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
