Adjust, Service, Repair or Replace as necessary
Isolate Mains Power to appliance as per TOPs P4
Isolate Water and Gas as appropriate

Location:
PCB - the heating output for the appliance was incorrectly set. This is likely to be the cause of the insufficient central heating temperature. It is advisable to re test the central heating after the diagnostic setting has been set correctly for the system requirements. Click here to retest.
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).

Refer to ADAPT for further information.

Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk