Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Measurement:
OUTER CASE REMOVAL
1. Undo the screw at the base of the case and lift the front case panel from its securing tabs at the top of the case.
PCB COVER REMOVAL
2. Remove the PCB cover by depressing the 6 retaining catches to disengage the barbs on the PCB box from the cover.
1. Undo the screw at the base of the case and lift the front case panel from its securing tabs at the top of the case.
PCB COVER REMOVAL
2. Remove the PCB cover by depressing the 6 retaining catches to disengage the barbs on the PCB box from the cover.
