Set Appliance State:
Gas Off
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Remove and inspect burner for damage or blockage.
It is better to remove the burner, combustion chamber front,
fan and gas valve as an assembly rather than in parts.
If the burner has to be removed from the combustion chamber front,
then new gaskets will be required (section 12.3 manufacturer's manual refers).
Refit burner assembly after test.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
3. Before final reassembly the G10 burner door gasket must be replaced.
It is better to remove the burner, combustion chamber front,
fan and gas valve as an assembly rather than in parts.
If the burner has to be removed from the combustion chamber front,
then new gaskets will be required (section 12.3 manufacturer's manual refers).
Refit burner assembly after test.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
3. Before final reassembly the G10 burner door gasket must be replaced.
Isolate as per TOPs P4
and refit as necessary