Set Appliance State:
Ensure NO demands
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset the appliance (press and hold power button for 4 seconds then release)
The appliance will then start a self check program which takes 1 minute.
While the self check completes set the appliance to DHW and CH mode (radiator and tap symbol in display - (toggle modes by pressing the "mode" button)
Once the appliance mode is set correctly the display should only show a radiator and tap symbol in the display.
If a fault code is shown at the end of the 1 minute self check click here.
The appliance will then start a self check program which takes 1 minute.
While the self check completes set the appliance to DHW and CH mode (radiator and tap symbol in display - (toggle modes by pressing the "mode" button)
Once the appliance mode is set correctly the display should only show a radiator and tap symbol in the display.
If a fault code is shown at the end of the 1 minute self check click here.
