XSol Diagnostic System

Step 1: Press and hold the mode button for 7 seconds, the display will show a number.

Step 2: Press the +/- buttons as required until 96 is shown in the display - this is the installer password, press the mode button.

Step 3: "d.00" will be displayed this is the first diagnostic code. Using the +/- buttons select the desired diagnostic code this ranges from d.00 - d.96 then press mode.

Step 4:The value of the diagnostic code will be displayed, use the +/- buttons to amend the value if necessary.

Step 5: When the desired value is reached either wait 3 seconds or press the mode button within 3 seconds to store the value, a tick will display briefly when the value is stored.

Step 6: Press and hold the mode button for 7 seconds to return to the normal operating mode.