Set Appliance State:
Access level 2 diagnostics as in the previous test.
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
The DS number can be disrupted if the power to the boiler is isolated or reset too soon after being switched on.
To avoid this wait at least 60 seconds between power off and on/and or reset.
To change the DS number press the mode button, the upper number should now start flashing.
Use the + or - buttons to adjust to the correct value (should be set to 7 as shown).
Press the MODE button to confirm, it should return to d93 flashing.
To exit the diagnostic menu, press the reset button.
Does the DS number set correctly?
To avoid this wait at least 60 seconds between power off and on/and or reset.
To change the DS number press the mode button, the upper number should now start flashing.
Use the + or - buttons to adjust to the correct value (should be set to 7 as shown).
Press the MODE button to confirm, it should return to d93 flashing.
To exit the diagnostic menu, press the reset button.
Does the DS number set correctly?
