Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Disconnect the HT lead from both the Spark Electrode and Generator
Observation:
Measure the resistance of the lead.
Expect approximately 1kOhm.
NOTE:
Ensure you get a good connection on the electrode end of the lead as the terminal inside the cup is very small.
Expect approximately 1kOhm.
NOTE:
Ensure you get a good connection on the electrode end of the lead as the terminal inside the cup is very small.
Isolate as per TOPs P4
and refit as necessary