Set Appliance State:
Gas Off
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Thoroughly inspect the heat exchanger including its insulation panel/ baffle.
Once the inspection is complete refit the burner assembly remembering to replace the burner door seal.
Note:
The burner door seal must be replaced when the combustion door assembly is removed.
Once the inspection is complete refit the burner assembly remembering to replace the burner door seal.
Note:
The burner door seal must be replaced when the combustion door assembly is removed.
Isolate as per TOPs P4
and refit as necessary