Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to AC Volts 
Gain access to PCB (use Insulation Mat as required)
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Measurement:
locate connector X10, top left corner of the PCB.
With the power switched on ensure there is 240vAC at the connector and that the Polarity is correct using the standard polarity check as detailed in TOPs.
With the power switched on ensure there is 240vAC at the connector and that the Polarity is correct using the standard polarity check as detailed in TOPs.
