Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove gas injector from the fan venturi
Observation:
Inspect the injector for restrictions, blockages or damage, ensure that it is completely clean. Inside of the injector should be clean brass & not black (see image).
NOTE:
Be sure that all gaskets are intact and in good condition and all joints are tested for gas tightness when refitting.
NOTE:
Be sure that all gaskets are intact and in good condition and all joints are tested for gas tightness when refitting.
Isolate as per TOPs P4
and refit as necessary